Towertalk
[Top] [All Lists]

ROHN 25G QUERY

To: <towertalk@contesting.com>
Subject: ROHN 25G QUERY
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Thu, 12 Dec 1996 17:19:28 -0500
In a message dated 96-12-12 16:18:44 EST, you write:

>I Have a 91 foot rohn 25g. It is Guyed with 3/16 EHS guy strand purchased
>from Rohn. The guy points are 29', 56', and 88', with the anchors out 80'
>from the base. I obtained these figures from the rohn handbook. My question
>is; will it make my tower safer if I also guy it at the 42.5 foot level and
>the 72' level? Any opinions??

Hi, Mick --

     You mean ADDITIONAL guys at those levels?  Your tower is the safest as
specified and configured by the factory and their specifications.  The more
important issues are what wind zone are you in and what is the load on your
25G?

73,  Steve  K7LXC

   TOWER TECH -- professional tower supplies and services for amateurs



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 K7LXC@contesting.com
Sponsored by Akorn Access, Inc & KM9P

<Prev in Thread] Current Thread [Next in Thread>
  • ROHN 25G QUERY, Melvin G. Brafford
    • ROHN 25G QUERY, K7LXC@aol.com <=