[TowerTalk] no-bend pier pin idea

Towertalk

[TowerTalk] no-bend pier pin idea

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] no-bend pier pin idea
From:	psoper@encore.com (Pete Soper)
Date:	Wed, 26 Mar 1997 10:26:23 EST

If I put nuts every few inches on a piece of threaded stock with 
large flat washers between each pair, would this be as effective 
for holding in concrete as bending the stock into a "J"? 

Regards,
Pete
KS4XG

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Sponsored by:             Akorn Access, Inc. & N4VJ / K4AAA

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] no-bend pier pin idea, JC Smith [TowerTalk] no-bend pier pin idea (ROHN 25G BASE), Pete Soper [TowerTalk] no-bend pier pin idea, Pete Soper <= [TowerTalk] no-bend pier pin idea, Roderick M. Fitz-Randolph

Previous by Date:	[TowerTalk] Guywire hardware questions, K7BG Matt Trott
Next by Date:	[TowerTalk] Sommer Antennas - Warning: contains strong language, K7LXC@aol.com
Previous by Thread:	[TowerTalk] no-bend pier pin idea (ROHN 25G BASE), Pete Soper
Next by Thread:	[TowerTalk] no-bend pier pin idea, Roderick M. Fitz-Randolph
Indexes:	[Date] [Thread] [Top] [All Lists]