Towertalk
[Top] [All Lists]

[TowerTalk] Rohn 45 overlap?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn 45 overlap?
From: ke5fi@wt.net (Chuck Dietz (KE5FI))
Date: Sat, 03 May 1997 07:06:59 -0500
Stanley Chen wrote:
> 
> At 01:59 PM 5/2/97 -0500, you wrote:
> >Stan Griffiths wrote:
> >> There is, however, a transistion section from 45 to 55 which will allow
> >> using 45 tops on 55 but I believe the transition is 20 feet long and VERY
> heavy.
> > The transition section is just a 10' section of 45 welded to a 10'
> >section of 55 done in a jig at the factory.  Its weight is the sum of
> >the weights of the two.
> >
> >Chuck, KE5FI
> >
> 
> Are you certain of this Chuck?  My Rohn catalog lists part 5545G as a 20'
> adapter section for joining 45G and 55G sections but a 10' section would
> make more sense (and be far more practical).

It is 20' long...  2 ten foot sections joined together.

Chuck, KE5FI

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>