I dont understand the need for these boxes if you are feeding monoband
yagis. The ARRL Antenna Handbook and ON4UN's book both describe how to use
asynchronous transformers out of coax. I use them for all my antennas. No
failures yet. N4RJ used these boxes on his 10M stack. A little water...
and BZZZZT... QRT.
73
Bill, W4AN
At 12:23 PM 7/4/97 -0400, you wrote:
>I don't understand the reluctance to use 50 to 75 ohm impedance
>transfomers. I built two of the ones featured in all recent ARRL
>Handbooks - took me about an evening, and total cost was about $30
>including the boxes. They work GREAT. When I put them into my system, I
>had one in backwards because of a stupid mistake, and the resulting SWR
>was 2:1. I figured out what was wrong and turned the transformer around
>and all was beautific.
>
>I run 1500 watts to them and they stay cool. I can't imagine why anyone
>would bother to do it any other way!
>
>73
>
>Bob W9KNI
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
Bill Fisher, W4AN (EX KM9P)
http://www.contesting.com
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|