K4OJ@aol.com wrote:
> solder the two center connectors
> together....if you want to get fancy you can use some brass tubing from the
> hobby shop that has an ID equal to the center pin's OD, otherwise solder them
> "side by side".
If you solder the center connectors "side-by-side" try wrapping them with some
small gauge copper wire first for added strength.
Chuck, KE5FI
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|