Towertalk
[Top] [All Lists]

[TowerTalk] 402CD coil repair question

To: <towertalk@contesting.com>
Subject: [TowerTalk] 402CD coil repair question
From: n3rd@ix.netcom.com (Dave Hawes)
Date: Wed, 7 Jan 1998 10:48:20 -0400
It looks like the replacement of the plated self tapping screws with 
stainless was insufficient to prevent one of the coils from going 
open circuit on the driven element here.  I plan to take the beam 
down to replace the self tappers with a machine screw all the way 
through the coil.

Does anyone remember the recommended screw size and length?  I can't 
find that particular detail in my archives of 402CD modification 
information.

Thanks.

73 - Dave N3RD
n3rd@ix.netcom.com
http://www.QTH.com/topten

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>