From:
Fred Hopengarten K1VR 781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address: fhopengarten@mba1972.hbs.edu
On Fri, 3 Apr 1998 21:27:48 -0500 "James D. Bruce"
<brucecom@shore.intercom.net> writes:
>Be carefull not to drop the bearings out, but be prepared to open it
>over a clean tarp, plastic sheet, or cloth. There is also a tricky part
to
>re-assembling it. Been there, Done both. Jim/NV3V
>-----Original Message-----
>From: Litwins <litwins@badsector.com>
>To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
>Date: Wednesday, April 01, 1998 08:18
>Subject: [TowerTalk] Ham IV rotor disassembly
>
>
>>Does anybody out there have any experience taking the upper housing
>off a Ham IV rotor.
K1VR: There are only two kinds of people -- those who have spillled Ham
IV ballbearings on the floor, and those who have never taken one apart.
_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search
|