Greetings from Gloucester, VA.
I am new to tower talk and have not yet seen this thread as I digest the
immense archives. I can't imagine a better place to learn about erecting
towers!
I am planning my first tower, 110' of R25G, Phillystrand guys, with a
modest 2el multiband HF quad on top (20-10), 2m/440 quads nested inside,
and some small sidemounted verticals lower down. I will also use a sidearm
to support the center of a 160m dipole for the lower bands.
I am very concerned about drawing lightning strikes, as this tower will be
at least 25' above the surrounding trees. It would seem that a lightning
rod on the very top of the mast, with a correspondingly good ground system
below, would provide the best protection from the inevitable strikes.
(thanks to this reflector, I now know how to build a good grounding system
!)
I plan to run a heavy, flexible strap from the bottom of the mast to one
of the tower legs (or all three?) to conduct the majority of the strike
current.
Can I use a copper plated ground rod, upside-down, with the point at the
top for a suitable lightning rod? Will this also have decent dissipative
effects to prevent minor strikes?
Thank you all for your comments!
--...MARK_N1LO...--
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|