Another similar boating product I've used very succesfully is also a marine
product called "SLX". It can be somewhat difficult to find and resembles
Naval Jelly. Use rubber gloves to protect your hands but it works great on
metals.
Jim/NV3V
PS, Thx all for the info on "Aligning Holes"
-----Original Message-----
To: <towertalk@contesting.com>
Date: Monday, May 18, 1998 09:36
Subject: Re: [TowerTalk] Rust Stain on Rohn 45
>I use a product called Rusticide. I purchased it at a large paint store in
>Clearwater, FL. Apply with brush or rag, rinse with soapy water and then
>clear water. Some scubbing may be required if the stuff is etched into the
>galvanizing. Use an old tooth brush.
>
>The material is basically phosphoric acid. There is another similar product
>sold to boaters for removal of rust stains on the deck. It is a somewhat
>dilute formulation compared to Rusticide. Product name I used was "Phoz".
>Snip, snip, snip
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|