Tom and all,
Howdy , I'm new to "TowerTalk" . I just subscribed today and have
already
seen that this list is going to be very informative !! My wife and I
recently purchased a new home on ten acres of semi flat land. We have
approx. 50 trees , but they are all new and small. So this list will be
giving me lots of ideas as to putting up towers and supports I am sure. I
have 80 feet of Rohn 25G that will soon be going up . My question is
concerning running the rotor cables through drilled holes in a bulkhead.
Does'nt this expose you to allowing lightning to enter your shack ?
Would'nt a strike just come down the rotor cable and proceed into the rotor
control box and then into the AC line ? Unless of course you have some way
of disconnecting the rotor cable before it comes into the house/shack.
We have some pretty heavy T-storms in this area and I am going to be
very
concerned about lightning when I get my tower and antennas up in the air !
I will be disconnecting EVERYTHING on the OUTSIDE of the house just to be
"safe" ! Besides .... it will make the "X"YL feel much safer ( and that's
the MOST important thing !!!! ) !!!!!!! Thanks guys and gals for
reading...... happy towering and be safe up there !!!!!!
73,
Steve Hurst
KA7NOC ( southern Idaho )
http://www.magiclink.com/web/shurst
shurst@magiclink.com
----------
> >>
>
> I have done the same thing. I fabricated an aluminum panel the same
thickness
> as the aluminum window and placed bulkhead coax connectors in it. I then
> grounded the panel to the main ground outside and used it as the ground
> distribution, also. I ran rotor cables through drilled holes and sealed
them
> with caulking. ----snip-----
> Tom, K5RC
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|