Towertalk
[Top] [All Lists]

Fwd: [TowerTalk] Mast-mounted rotors and assy

To: <towertalk@contesting.com>
Subject: Fwd: [TowerTalk] Mast-mounted rotors and assy
From: N0OEL@aol.com (N0OEL@aol.com)
Date: Sat, 6 Jun 1998 00:18:05 EDT
This is a multi-part message in MIME format.

--part0_897106685_boundary
Content-ID: <0_897106685@inet_out.mail.aol.com.1>
Content-type: text/plain; charset=US-ASCII


--part0_897106685_boundary
Content-ID: <0_897106685@inet_out.mail.aol.com.2>
Content-type: message/rfc822
Content-transfer-encoding: 7bit
Content-disposition: inline

From: N0OEL@aol.com
Return-path: <N0OEL@aol.com>
To: wa6ibu@earthlink.net
Subject: Re: [TowerTalk] Mast-mounted rotors and assy
To: <towertalk@contesting.com>
Date: Sat, 6 Jun 1998 00:15:29 EDT
Mime-Version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit

Yep.   As I recall HyGain specs say 6 sq ft for mast mounted rotors.    And
thats the Ham M, II, III, and IV.

Warning.    9.5 sq ft could tear your roof off on a tripod.   Be sure you do
some super guying.    

Good luck.

73
Mike
K0BUD

--part0_897106685_boundary--

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>