See if Hy-gain will sell you copies of the drawings of the base unit.
This way you can have one manufactured buy a job shop.
Jim
At 10:47 AM 6/4/98 -0500, Daniel Baker wrote:
>Hy-Gain has discontinued its tower line. I called them about the
>availability of bases for the HG54HD (54 foot crank up) tower. I was told
>there are no bases in stock and no material to build a new base. Since
>they are discontinued they will not be ordering any additional material.
> The tower must be bolted to a Hy-Gain base structure which have special
>flanges on the end of the tower which mate with flanges on the base. This
>allows the tower to fold over at the tower-base point. It doesn't look
>like J bolts or similar would work. Any one have any ideas on how to get a
>base for one of these Hy-Gain towers?
>Dan K9HZ
>danaf9r@aol.com
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|