Towertalk
[Top] [All Lists]

[TowerTalk] Attaching guys to 45g

To: <towertalk@contesting.com>
Subject: [TowerTalk] Attaching guys to 45g
From: n4kg@juno.com (T A RUSSELL)
Date: Sat, 8 Aug 1998 03:12:10 -0600

On Fri, 07 Aug 1998 21:31:11 -0700 henry gillow-wiles <henry@rio.com>
writes:
>
>I'm in the process of putting up 90 feet of 45g. 
>
>What is the recommended way of wrapping the EHS around the tower legs?
>
>Do I use a thimble? 
>
>How do I get it around the tower leg?
>
>Thanks...........
>
>Henry
>
>KB7RTA
>henry@rio.com
>

Henry -

The BEST and recommended way, is to use a guying bracket which
fits around the tower.  Even better to add the torque bar arms which
add stability to the tower.

The NEXT best method is to place a Preformed Guy Grip around the
leg, including BOTH the upper and lower Z bracing corners in the loop.
This reduces the stress on the welds compared to placing the loop
around the leg above a step / weld position.

Guy grips are MUCH  easier to install than cable clamps and the do
NOT work loose as clamps do over time and temperature cycling.

de   Tom   N4KG


_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>