But.... the 6" diameter will not be very effective!!!
For 160 mtrs. need 15" min.
For 75 mtrs. need 10" min!
Dave_K9NX wrote:
> At 01:59 PM 8/26/98 -0500, Lee Buller wrote:
>
> <snip>
> >I am planning to use Lexan waffers about 6" in diameter. I plan drill
> >holes in the Lexan and the use some small copper tubing cut to quarter of
> >an inch long (a kind of bead) and place them on each side of a waffer.
> >Then the plan was to solder the copper "beads" in place so the waffer
> >doesn"t move.
>
> HMMMM finally a GOOD use for those AOL CD rom disks ~8^). Although I think
> I would just use a crimping tool rather solder the retaining beads
>
> Dave
> K9NX
>
> --
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|