Towertalk
[Top] [All Lists]

[TowerTalk] MA-40 Concrete Base Help (again)

To: <towertalk@contesting.com>
Subject: [TowerTalk] MA-40 Concrete Base Help (again)
From: MBecker@aol.com (MBecker@aol.com)
Date: Tue, 1 Sep 1998 12:11:29 EDT
Hi everyone,

I'm back again with some more dumb questions on constructing the rebar cage
for my MA-40.  The hole will be 3' X 3' X 4'.  I'm having trouble interpreting
the diagram in the US Tower instructions.  This is the way I understand it.
The corners have vertical 1/2" rebar.  The horizontal squares are 3/8" rebar
but is says they are to be @ 24" O.C.  Does that mean that thay are spaced
vertically 24" from the bottom of the hole to the top?  Also the vertical 3/8"
rebar on the sides has the same designation.  I'm not sure if I am seeing this
right.  I would appreciate a little clarification.  

Thanks for the help and also thanks for the previous suggestions.  73.

Mike
KT3U

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>