Towertalk
[Top] [All Lists]

[TowerTalk] Rope End Sealing

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rope End Sealing
From: designserv@ipass.net (LYN)
Date: Tue, 15 Sep 1998 22:17:08 -0400


Terry Sharar wrote:

> All,
>
>         I recently bought some 3/8 inch braided dacron rope to use with a
> gin pole. I'd like to receive some suggestions on the best way to seal the
> rope ends, something better than the black electrical tape the vendor
> used.

A hot knife (or a hot knife blade for a hefty solder gun) works better
than a torch or cigarette lighter.  I'll second the motion about NOT
touching it for a long time after you have removed the heat.

Lyn, W4WDN


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>