TU everyone ... will post further adventures if they merit ... 73, Dave,
K3BHJ.
-----Original Message-----
From: David J. Windisch <dwindk3bhj@fuse.net>
To: towertalk@contesting.com <towertalk@contesting.com>
To: <towertalk@contesting.com>
Date: Tuesday, September 15, 1998 7:06 AM
Subject: [TowerTalk] pliable rollers
>
>Need some ideas for replacing the 30+-year-old rollers on my Heights
>crankup-foldover "old men's tower" (they keep the telescoping center
section
>from rubbing against the outer section). SO, they gotta be sturdy and
>pliable.
>OD is about 1-5/16", ID is about 5/8", width is about 1-1/8".
>Any ideas on sources for materials? I can get the (if needed) machining
>done here in Cincinnati.
>TIA -- 73, Dave, K3BHJ.
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|