At 14:39 10/13/98 , you wrote:
>Anybody have experience/suggestions for securely attaching Rohn 25 top
>sections to wooden power pole tops? Our 15 or so 65 ft wooden poles
have
>tops that are just an interference fit to the inside of a Rohn 25
section,
>and I am contemplating mounting the Rohn 25 tops to allow easy Rotator
>Mounts.....
===============================>
Back in the late 60's we used great big lag bolts to screw into the
poles and affix the tower top section to the pole.
Used a drill first, then turned a big lag bolt into the holes.
If the poles JUST fit into the top sections that is exactly the way you
want them.
Use a level to make sure you are straight before you commit to the hole
drilling spots.
I vividly remember that I burned and itched for weeks from the creosote
sawdust eating away at my neck and back after that job was done !!
73,
N5RP
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|