I am puzzled that it is claimed that the bolts for the 25g are not in the
catalog, My copy (recently recieved from Steve) has the bolts in the
hardware section.
there are two sizes- 1/4x28-1-1/2, Part #220029 (bolt) &240009 (nut), and
5/16x24-1-1/2, part # 220037 (bolt) & 240016 (nut)
Both are specified as grade 5, and , of course, are galvanized. (not zinc
plated)
There are at least two sources on the reflector that sell these in sets (3
ea per joint)
one is : Stan Griffiths <w7ni@teleport.com>
the other that I know is :WB0W@ibm.net ( he also has one of the better
Gin-Poles)
Hope this helps
Bill W4BSG
-
Bill Aycock W4BSG
Jackson County, AL
EM64vr
W4BSG is "vanity" this time, but was
earned by exam in 1954, the first time.
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|