In a message dated 99-02-03 11:26:57 EST, driley@1st.net writes:
> i am planning on building and putting up a 40 foot freestanding tower.
> where can i find info on how deep a foundation i need and how wide a base i
> will need? i do not have a license yet.
Hi, Denise --
A good sized project for anyone! And a big learning curve too.
TowerTalk is the best source for practical info and answers to questions.
You have two choices of material - galvanized steel and aluminum. Rohn
makes the BX series of steel towers and Trylon has the Titan series. Catalogs
and info for both are available from Champion Radio Products
(http://www.championradio.com).
Aluminum tower suppliers are Universal and Heights. I think they both
have web sites - Heights is www.heightstowers.com but I don't have the other
one.
For certain tower heights, the bases are roughly the same. You'll find
lots of valuable information on past self-supporting tower discussions at the
TowerTalk archives - www.contesting.com.
I wrote a 6-part series on towers for my "Up The Tower" column in CQ
Contest magazine. A copy is available for two bucks to Tower Tech, Box 572,
Woodinville, WA, 98072.
73 and good luck, Steve K7LXC
Tower Tech
Champion Radio Products
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|