I have several prop-pitch motors and the average time for the motor to
rotate one full turn is in the area of 1.5 minutes..
I just rebuilt another one and it takes 70 seconds for the motor to complete
one full turn..that is kind of fast ..
- the motor is a 24 volt motor
- the speed stamped on the unit is the correct one .. matches all the rest
- no internal gears have been modified
This is a strange one !
It is the cleanest one I have ever seen..just faster ...
When I use it with the M2 rotor control it over shoots the set point ...and
has to hunt..the other motors don't do this because they are slower...
Of course I can live with this but it anyone has any experience with this
please let me know..
Struggling to get all this up before IARU and I am not sure I am going to
make it..
Thanks for any help..
73/Sam K9SD
Utilities SIET
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|