You can find insulators at your local feed/seed stores....These electric
fence insulators (ceramic) are inexpensive...about $3.50 or so per box of
From: Bill Wall <firstname.lastname@example.org>
To: W4nf@aol.com <W4nf@aol.com>; email@example.com
Date: Monday, September 20, 1999 6:36 PM
Subject: Re: [TowerTalk] Non Resonant Guy Wire Lengths
>Hi All and Jack,
>ARRL Handbook has the cuts needed to make your guys non resonant. The hard
>is finding the glass/porcelean insulators.
>> My last message went out without a subject. Sorry about that. I think
>> get better feedback with a subject line. Here is a copy of the orginal
>> message. 73, Jack W4NF
>> Hello All,
>> The concrete will be cured to 28 days next Sunday and I'm planning on
>> stacking the rest of the sections up to the final height of 75' on the
>> I have guys at the 23' level right now and I just ordered the LOOS gage
>> tension them to the proper limit.
>> My question deals with the breakup of the next two set of guys. I will
>> stacking a second C3E sidemounted on the tower so I want to breakup the
>> middle set of guys and the top set.
>> The middle set will be 76' long so I thought I would break it up as
>> (starting from the tower and going down to the anchor: 4' - 54' - 18'.
>> The top set will be 92' long and I was going to break up as follows:
>> 54' - 27' - 7'.
>> Please tell me if I'm doing anything fundamentally wrong with this
>> I would prefer to keep them as long as possible as I'm going broke
>> with the purchase of the antennas, etc.
>> Thanks for your help. Jack W4NF
>> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>> Submissions: firstname.lastname@example.org
>> Administrative requests: towertalk-REQUEST@contesting.com
>> Problems: email@example.com
>> Search: http://www.contesting.com/km9p/search.htm
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com