I ordered some from HyGain earlier this week. About $7 for a 6' piece.
The guy I talked to said he had about a dozen pieces left in stock.
I thought TexasTowers would be the place to get it also, but they don't
carry that size.
(seems like something they ought to carry - the standard end tip size for
HyGain 20-15-10m monobanders.)
-- Tom
At 01:12 PM 10/27/99 -0400, you wrote:
>I'm in the process of refurbishing a 10 meter beam and need to find two five
>foot pieces of 7/16" O.D. aluminum tubing to mate properly with the swaged
>ends of the preceding element section. Have struck out so far with local
>sources, and texas towers does not stock this size.
>
>Any leads on where I can get this "miniscule" order filled at a reasonable
>cost and with prompt delivery?
>
>Thanks,
>George
>________________________________________________________________________
>Amateur Radio Station K3GP - Alliance, Ohio - Grid Square EN90kv - ARRL Life
>Member
> Web page: www.qsl.net/k3gp
>
>"I'd never belong to a club that would have me as a member" -
> Groucho Marx
>________________________________________________________________________
>
>
>--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
----------------------------------------------------------------------------
----------------------------------------
e-mail: frenaye@pcnet.com YCCC --> http://www.yccc.org/
Tom Frenaye, K1KI, P O Box 386, West Suffield CT 06093 Phone: 860-668-5444
--
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|