Larry,
This seems to be a typical repetitive problem. Best bet is to check them
once or twice a year for tightness. I use split locks but they do loosen
with a large antenna load and lots of wind.
73,
Joe, W1JR
At 08:59 AM 1/1/01 -0800, Larry McDavid wrote:
>I know this is an old question. But, now it is mine.
>
>Today I did a PM on my 60 foot crankup; it has been about 9 months since
>the last PM. To my surprise, the Tailtwister rotor bolts were all loose.
>It's turning one C3. The most severe tower environmental concern in Los
>Angeles is sunshine, not wind.
>
>I used flat and split lock washers on the six 5/16 stainless bolts.
>Nevertheless, all were loose.
>
> >From others who have really solved this problem, I'd appreciate knowing
>what really works. Please don't clutter the reflector; direct replies
>will be appreciated!
>--
>Best wishes,
>
>Larry McDavid W6FUB
>Anaheim, CA (20 miles southeast of Los Angeles, near Disneyland)
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/towertalk
>Submissions: towertalk@contesting.com
>Administrative requests: towertalk-REQUEST@contesting.com
>Problems: owner-towertalk@contesting.com
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|