I drive my ground rods with piece of pipe slid over the ground rod to prevent
it from buckling, get up on the folding ladder and hammer the heck out of the
ground rod. Then cut the muchroomed end, connect ground wire with clamp,
cover everything with hot melt glue, spray it with paint, cover with dirt and
fuggetaboutit. You can use different length of pipe if there is problem with
buckling as you progress.
Yuri, K3BU
--
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|