Towertalk
[Top] [All Lists]

[TowerTalk] Re: RCS-4

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: RCS-4
From: ckepus@calweb.com (Chris Kepus)
Date: Mon, 5 Feb 2001 14:00:49 -0800
I hope this doesn't sound as dumb as it looks.........but........is there
any reason why these comments would or would not apply to the RCS-8V?  I
just picked one up and have not put it in service yet.
Thanks,
Chris
W7JPG

----------
> From: David Jordan <wa3gin@erols.com>
> To: K6TFZ@aol.com
> Cc: towertalk@contesting.com
> Subject: Re: [TowerTalk] Re: RCS-4
To: <towertalk@contesting.com>
> Date: Monday, February 05, 2001 7:50 AM
> 
> Check the voltage at the relay unit...I've run into similar problems
where the
> control voltage was low and the relays buzzed but not chattered causing a
very
> fast hum type noise.  Also check the resistance of the relay
windings...the
> windings may have intermittents which may cause noise...
> 
> HAVE FUN,
> dave
> WA3GIN
> 
> K6TFZ@aol.com wrote:
> 
> > The most clockwise position  (northeast) is the same as off and
operates
> > straight through. That is why there is no noise in that position. No
relay is
> > activated. As for the noise: haven't had the problem. Sorry.   K6TFZ
> >
> 
> 
> --
> FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>