Jerry,
Since the Yaesu rotor only requires 6 conductors
and you have an 8 conductor cable, you can also
double up on two of the #22 wires. I am not familiar
with Yaesu rotors but the CDR / HG rotors have
both direct and phase shifted motor control lines
so it would be good to use the doubled up wires
for all of those functions. Use the single #22
wires for the position indicator lines. A little
extra resistance in those lines will make no
difference since they are attached to the
an internal (500 ohm?) potentiometer.
Tom N4KG
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|