Towertalk
[Top] [All Lists]

[TowerTalk] Connectors for RG-142?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Connectors for RG-142?
From: wd3q@erols.com (Eric Rosenberg)
Date: Sun, 10 Jun 2001 11:52:42 -0400
I've just inherited approx. 50 feet of RG-142 that I'd like to break up 
and use as jumpers in the shack.

What connectors are available for this double-shielded coax, and how 
hard are they to put on? Do I need any special hardware?  My source 
*may* have a connector tool, but if so I suspect it's for BNCs or TNCs 
only.

Thanks in advance,

Eric W3DQ
Washington, DC 


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Connectors for RG-142?, Eric Rosenberg <=