A quick question:
I have an elevated 80M 4-square made of Rohn 25. There
is 15' of tower, then an insulator, then 50' of tower,
then a 20' whip made of aluminum tubing. Every winter
one or more of the whips break off (even using triple
wall tubing). This year 3 broke off. I have to do
something:
1) Extend each vertical with 1 or 2 more sections of
tower. This costs $. I have the tower, but the
Phillstran, and Grips X 4 towers adds up quick.
2) Take the whips off and top load each tower with a
piece of wire strung to the top of another tower.
Thus I would have 4 inverted-L's, but the top
horizontal portion would be exactly horizontal.
Would #2 alter the gain or pattern much? I think it
would decrease the bandwith, but this antenna is used
mainly on CW.
Thanks for any opinions.
Bill, WB0O in North Dakota
__________________________________________________
Do You Yahoo!?
Get personalized email addresses from Yahoo! Mail - only $35
a year! http://personal.mail.yahoo.com/
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com">
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|