Towertalk
[Top] [All Lists]

[TowerTalk] Ginpole for 20 foot sections

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ginpole for 20 foot sections
From: w7ni@easystreet.com (Stan or Patricia Griffiths)
Date: Wed, 13 Jun 2001 11:58:01 -0700
n4kg@juno.com wrote:

>         How is this 2:1 mechanical advantage achieved?
>
>         Scenario 1 -  End of rope is attached to the frame
>         of the top pulley.  Rope runs down to Second pulley
>         with hook at load.  Rope then runs up and through
>         the TOP pulley.  Force in each vertical run of the
>         rope is 150 lbs.  450 lbs on top hook as proposed.
>
>         This is NOT how a gin pole is configured.

Well, if I wanted a 2:1 mechanical advantage on my gin pole and the reduction 
in gin
pole load it provides, this is EXACTLY how I would configure my gin pole.

Stan
w7ni@easystreet.com


List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>