Towertalk
[Top] [All Lists]

[TowerTalk] Rohn25 - different size bolt holes?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rohn25 - different size bolt holes?
From: K7LXC@aol.com (K7LXC@aol.com)
Date: Wed, 20 Jun 2001 21:44:55 EDT
In a message dated 6/20/01 6:42:16 PM Pacific Daylight Time, 
DMartin560@aol.com writes:

> Yes Steve, they take 1/4" x 1-1/2"  and  5/16" x 1-1/2" bolts.

    And for some reason they're fine-threaded as well as SAE Grade 5.

Cheers,   Steve    K7LXC
Tower Tech 

List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A 
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>