My research into this several years ago revealed:
Grade 8 are too brittle for tower applications.
Grade 5 is the recommended grade for tower work.
Bill, N3RR
----- Original Message -----
From: MikeB <mike@kb0ozn.com>
To: <towertalk@contesting.com>
Sent: Tuesday, June 26, 2001 10:55 PM
Subject: [TowerTalk] Re: Grade 5 question different size bolt holes?
> I was reading this and the question occured to me as to whether or not
> it mattered if you used grade 5 or went up a step to grade 8???
>
> Thanks
> Mike
> KB0OZN
> >
> > I have bolt kits available and I can provide you with either
mechanically galvanized
> > grade 5 (same grade as Rohn provides)
>
> List Sponsor: Are you thinking about installing a tower this summer? Call
us
> for information on our fabulous Trylon Titan self-supporting towers - up
to
> 96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
> www.ChampionRadio.com</A>
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|