Towertalk
[Top] [All Lists]

[TowerTalk] finding resonant frequency of a shunt-fed tower for 160

To: <towertalk@contesting.com>
Subject: [TowerTalk] finding resonant frequency of a shunt-fed tower for 160
From: kc5ajx@hotmail.com (Rick Bullon)
Date: Wed, 01 Aug 2001 03:04:37 +0000



>From: "Guy Olinger, K2AV" <k2av@contesting.com>
>To: "WA9ALS - John" <wa9als@starband.net>,   "TowerTalk" 
><towertalk@contesting.com>
>Subject: Re: [TowerTalk] finding resonant frequency of a shunt-fed tower 
>for 160
To: <towertalk@contesting.com>
>Date: Tue, 31 Jul 2001 00:31:52 -0400
>
>
>I modeled that with the following assumption: that I would ground the 20
>meter ref and dir (only) to the boom which is grounded to the mast and
>then to the tower . This places the voltage peak out at the end of the
>longest and highest elements. That up 13 feet on a mast atop an 80 foot
>Trylon self standing tower models to a resonant frequency around 1.7
>MHz. I suspect in practice it will be lower than that, say ~1.6 MHz.
>
>Based upon that I'm going to bury a lot of copper around the Trylon,
>load it on 160 and deal with what crops  up.
>
>-----------------
>
>Guy Olinger
>Apex, NC, USA
>
Guy
I have buried lots of copper around here but I have never gotten a crop from 
it.
I think there is a guy on here that claims to grow aluminum though. Can't 
get that stuff to grow here either :)
73
Rick
KC5AJX

_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp


List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>