In a message dated 7/9/01 12:25:24 PM Pacific Daylight Time, n4kg@juno.com
writes:
> A couple of good wrenches with long handles (9-12 inches)
> should be sufficient to remove or break the rusted bolts.
I agree - break 'em off and throw 'em away. New Rohn JBK's (joint bolt
kits) are cheap.
I think there is a commercial standard that says not to re-use tower
bolts.
Cheers, Steve K7LXC
Tower Tech
List Sponsor: Are you thinking about installing a tower this summer? Call us
for information on our fabulous Trylon Titan self-supporting towers - up to
96-feet for less than $2000! at 888-833-3104 <A
HREF="http://www.ChampionRadio.com";>
www.ChampionRadio.com</A>
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|