Hello all;
I have a 40 ft Rohn 25G tower with an A3S tribander at the 41 ft. level.
There is 5 to 6 feet of 1 and 3/4 inch mast above the tribander. Plan is to
install an Antron 99 cut for 10 meters above the tribander.
Two questions:
Is the 5 to 6 ft spacing enough to not allow interaction?
If I leave the Antron uncut and use a tuner to also load it on 15 and 20
will that cause a problem with the A3S?
Thanks
Jimmy Floyd
NQ4U // NNN0RKO
http://personal.bellsouth.net/~nq4u/home.html
nq4u@bellsouth.net
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|