Towertalk
[Top] [All Lists]

[TowerTalk] Ham 'M' grease

To: <towertalk@contesting.com>
Subject: [TowerTalk] Ham 'M' grease
From: n4kg@juno.com (n4kg@juno.com)
Date: Mon, 27 Aug 2001 16:36:11 -0600
On Mon, 27 Aug 2001  Anthony Bowyer <adb1x1@yahoo.com> writes:
> 
>    Anyone rebuilt a Ham 'M' or one of it's siblings lately? 
>    I was wondering what the best grease is for it.
> 
> Thanks!
> Anthony  NT4X
> 

>From the Horse's Mouth in 1998 :
( Roger Cox HyGain / Telex Engineer ) 

From: Roger Cox
To: n4kg@juno.com (T A RUSSELL)
Subject: Re: Rotor Grease
To: <towertalk@contesting.com>
Date: Thu, 10 Sep 1998 

          Effective March 1, 1993 we started using Nye Nyogel 727F
     synthetic lubricant in the rotator assemblies.  This includes all
     models except the HDR-300, which comes from the vendor with 
     low temp grease.  A date of  March 1993? or later on the bottom 
     of the rotor unit identifies new units.  This grease will permit
normal 
     operation to -30 degrees F (-34 deg C).

     73 Roger WB0DGF

     Telex Communications, Inc.

________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>