Hello:
My previous question regarding a thrust bearing for a Telex Hy-Gain HG70-HD
did not yield much response.
Perhaps a better question would be: Where can I get a very heavy-duty
thrust bearing that will accept a 2" mast, and can be bolted to the flat
steel plate at the top of the tower.
Drilling, welding, machining or adapting is no problem. I just need the
bearing and bearing holder.
The reason I need "very heavy duty" is because I'll have a 26' X 27'
H-frame, four relatively large 6M beams, and an elevation rotor on the mast
above the tower.
Thank you,
Barrie, W7ALW, Missoula, Montana
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|