The Aluma Tower use the "foot" to hold the sections.
Larry WA2SRY
----- Original Message -----
From: "alsopb" <alsopb@gloryroad.net>
To: <TowerTalk@contesting.com>
Sent: Monday, September 10, 2001 2:39 PM
Subject: Re: [TowerTalk] Paranoid vs. Overkill
>
> I guess this is "typically" true for some crank-ups. However, if the
> crank up design has a foot or latch which carries the load after
> erection, then then cable strength is not limiting. EZ way towers
> used a foot as do rohn-25 Hazer's. I wouldn't be too keen on any
> design which used a cable as the entire support! But we don't have a
> lot of choices anymore.
> >
> > Typically ultimate tower strength for guyed towers is limited by leg
> > capacity and for crank-ups it's the cable capacity.
> >
>
> 73 de Brian/K3KO
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 96 feet for under $1500!!
http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 96 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|