----- Original Message -----
From: "Tom Martin" <tmartin@chartermi.net>
To: <towertalk@contesting.com>
Sent: Monday, September 24, 2001 12:13 PM
Subject: [TowerTalk] HyGain Beta rod
>
> My tower project is coming along and should be completed before the snow
> flies which actually could be tomorrow here in the U.P.. In getting the
> 5 element 20 ready, I noticed that one of the Beta rods was broken an
> inch from the terminal that attaches to the boom. I had my welder try to
> fix it but the aluminum keeps exploding and he can't get a good weld.
> If it had broken somewhere down the length of the rod, it would be easy
> to repair. Any ideas out there short of ordering a new one from MFJ? I
> am coming to the end of my budget which has gone way past the 10%
> overage figure!
>
> 73, Tom W8JWN
>
>
> List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also check out our self
> supporting towers up to 100 feet for under $1500!!
http://www.anwireless.com
>
> -----
> FAQ on WWW: http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: owner-towertalk@contesting.com
>
>
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|