Towertalk
[Top] [All Lists]

[TowerTalk] Rebuilding Ham M Rotor

To: <towertalk@contesting.com>
Subject: [TowerTalk] Rebuilding Ham M Rotor
From: n0tt1@juno.com (n0tt1@juno.com)
Date: Thu, 4 Oct 2001 05:13:37 -0700
On Thu, 4 Oct 2001 10:59:34 -0700 (PDT) Anthony Bowyer <adb1x1@yahoo.com>
writes:
> 
>   Those of you who rebuild your own rotors, do you
> paint the base of the brake housing, the part that
> mount on a plate or has the lower mast support
> attached?
> 
I never have becasue I haven't seen any corrosion at the base.
I have though, given the terminal strip a coat of clear Krylon(R) to 
retard corroision there.  I remove the wires, tighten the screws,
and spray light coats.

73,
Charlie, N0TT
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today!  For your FREE software, visit:
http://dl.www.juno.com/get/web/.

List Sponsored by AN Wireless:  AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!!  http://www.anwireless.com

-----
FAQ on WWW:               http://www.contesting.com/FAQ/towertalk
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com


<Prev in Thread] Current Thread [Next in Thread>