On Thu, 4 Oct 2001 n0tt1@juno.com writes:
>
> On Thu, 4 Oct 2001 10:59:34 -0700 (PDT) Anthony Bowyer
> <adb1x1@yahoo.com>
> writes:
> >
> > Those of you who rebuild your own rotors, do you
> > paint the base of the brake housing, the part that
> > mount on a plate or has the lower mast support
> > attached?
> >
> I never have becasue I haven't seen any corrosion at the base.
> I have though, given the terminal strip a coat of clear Krylon(R) to
> retard corroision there. I remove the wires, tighten the screws,
> and spray light coats.
>
> 73,
> Charlie, N0TT
>
I replaced the screws in my rotor terminal strips
with longer STAINLESS STEEL screws.
Tom N4KG
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|