I'll second Tom's comment on RX vs TX on loose solder joints in PL259. Just
cured an intermittent RX problem on my WARC beam that had plagued me for
several weeks. After checking all over the shack for possible easy fixes
finally got to a PL259 in the coax outside which had the center conductor
solder connection to pin loosened. Replaced the connector with good solder
joints and problem solved.
73 Don K5AQ
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|