I'll have to agree with Val. Usually the problem
turns out to be the last thing you worked on before
the problem developed. Been there, done that, face
red...
73, Stew K3ND
--- ValErwin@aol.com wrote:
>
> Tom:
>
> Could this be the clue as to what is wrong? You
> said:
>
> "it did turn on the bench with temporary leads
> before I wired that Quick
> Disconnect" .....
>
> Hmmm, did you happen to give it a try a second time
> with the connector in
> place BEFORE draggin' it up the tower ??
>
> Val
> W5PUT
>
> List Sponsored by AN Wireless: AN Wireless handles
> Rohn tower systems,
> Trylon Titan towers, coax, hardline and more. Also
> check out our self
> supporting towers up to 100 feet for under $1500!!
> http://www.anwireless.com
>
> -----
> FAQ on WWW:
> http://www.contesting.com/FAQ/towertalk
> Submissions: towertalk@contesting.com
> Administrative requests:
> towertalk-REQUEST@contesting.com
> Problems:
> owner-towertalk@contesting.com
>
__________________________________________________
Do You Yahoo!?
Find the one for you at Yahoo! Personals
http://personals.yahoo.com
List Sponsored by AN Wireless: AN Wireless handles Rohn tower systems,
Trylon Titan towers, coax, hardline and more. Also check out our self
supporting towers up to 100 feet for under $1500!! http://www.anwireless.com
-----
FAQ on WWW: http://www.contesting.com/FAQ/towertalk
Submissions: towertalk@contesting.com
Administrative requests: towertalk-REQUEST@contesting.com
Problems: owner-towertalk@contesting.com
|