You can use 93 ohm or 100 ohm coax, if you wish ... in fact, the 75-ohm
will probably work even better than the 50-ohm. [Assuming that you will
put the antenna near a 1/2 high - this will give a feedpoint impedance
of approximately 72 ohms]
Don't know why you'd use that antenna .. but have fun!
Good luck
Don - N8DE
Darfug@aol.com wrote:
>
> Do bazooka antennas only use 50 ohm coax?Can it be 75 ohm coax considering VF
> of coax?
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
> text/plain (text body -- kept)
> text/html
> ---
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
|