Towertalk
[Top] [All Lists]

[Towertalk] ground rod length question

To: <towertalk@contesting.com>
Subject: [Towertalk] ground rod length question
From: ve7hcb@rac.ca (Chris BONDE)
Date: Wed, 10 Apr 2002 16:38:58 -0700
I just had a new electrical in box etc.  They used a copper plate about 
18in deep in the ground.  The ground rods for the electrical system are no 
longer used.  The only reason I received was, " its code."

Chris opr VE7HCB


At 04:07 PM 2002-04-09 -0400, A9xw@cs.com wrote:
>It depends on your ground conductivity.  Check local ordinances or
>electrician.  usually 8 to 12 foot is enuf. If you have 16 foot rods, drive
>them in and make sure you have a very tight connection to the tower legs.  I
>use cadweld and 500 MCM or larger connecting buss.
>
>AA9W
>_______________________________________________
>Towertalk mailing list
>Towertalk@contesting.com
>http://lists.contesting.com/mailman/listinfo/towertalk



<Prev in Thread] Current Thread [Next in Thread>