To: | <towertalk@contesting.com> |
---|---|
Subject: | [Towertalk] fulton k2550 winch |
From: | steve.takacs@tiscali.de (steve takacs) |
Date: | Sun, 28 Jul 2002 15:20:33 +0200 |
have found the solution. the pinion gear on the input drive shaft is = just threaded on. if as in my case everything is glued stuck, put the = pinion tight in a vise and give the crank a good pull counterclockwise. = the pinon comes of the shaft and you can clean, replace or whatever the = brake linings and the clutch plates. had to look real good at the = action on a good winch to see this. --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html --- |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Towertalk] SteppIR Power Handling, Tom Rauch |
---|---|
Next by Date: | [Towertalk] Wisconsin need tower help, Michael Jackson |
Previous by Thread: | [Towertalk] fulton k2550 winch, Richard Zalewski |
Next by Thread: | [Towertalk] elusive Codes info, Jim Henderson |
Indexes: | [Date] [Thread] [Top] [All Lists] |