Towertalk
[Top] [All Lists]

[Towertalk] which box to use ?

To: <towertalk@contesting.com>
Subject: [Towertalk] which box to use ?
From: kb7ww@easystreet.com (Arthur Moe)
Date: Mon, 02 Sep 2002 20:08:30 +0000
Bill,

Please explain your statement that Aluminum will not produce a Faraday shield.

Art
KB7WW

"Bill Hider (N3RR)" wrote:
> 
> It's a no-brainer:
> 
> Metal - and steel at that.  Aluminum will not do the following:
> 
> With steel, you get the benefit of Faraday shield that you will not get with
> plastic or with aluminum.
> 
> All cables (coax, rotor, other control cables, even CATV, TELCO, etc.)
> should go through a hole in the SPG metal box, and thereby through the
> Faraday shield.  This will protect from H and E plane energy that builds-up
> on the cables en-route to the SPG box.  The box itself should be grounded to
> a ground rod via a very low-inductance ground, such as a copper strap
> located directly below the SPG.  In the case of a SPG box that's rather
> large, or if you want more protection, ground the box at the leading edge
> and trailing edge lower corners.  The leading edge is a reference to the
> route that the incoming ground wire (from the tower or ground-grid) takes to
> the SPG and the direction the outgoing ground wire (to the rest of the
> ground-grid) takes to/from the SPG.  See my website for my example:
> www.erols.com/n3rr
> 
> 73,
> Bill Hider, N3RR
> 
> ----- Original Message -----
> From: <KB2HUK@aol.com>
> To: <towertalk@contesting.com>
> Sent: Monday, September 02, 2002 12:01 PM
> Subject: [Towertalk] which box to use ?
> 
> > <PRE>Hello everyone !  I need some advise.  I am terminating all my runs
> of coax
> > and rotor cable into a box which has the correct poly phayser suppressors
> > installed in a length of 1/4 inch thick buss bar. the coax will then come
> out
> > of the surpresors and into the house.  my question is this I am planning
> to
> > enclose this junction in a box I want to know which would be better to use
> a
> > metal electrical box or a plastic non conductive box like the new tool
> boxes
> > ?  I have both . thanks for your input !     John kb2huk
> > _______________________________________________
> > Self Supporting Towers, Wireless Weather Stations, see web site:
> http://www.mscomputer.com
> > Call 888-333-9041 to place your order, mention you saw this ad and take an
> additional 5 percent off
> > any weather station price.
> > _______________________________________________
> > Towertalk mailing list
> > Towertalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> 
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site: 
> http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an 
> additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


<Prev in Thread] Current Thread [Next in Thread>