[Towertalk] identify a rotor

[weightdn@adelphia.net (Mike Rhodes)]

Is the bell the bottom-most part of the rotor or is there another 2 or 3
inch section of rotor (not mast-mount adapter) below the bell? If it ends at
the bell, it is an old TR-44 series rotor with a friction brake. If it has
the bottom portion, it is Ham-M or later with a wedge brake.

Mike / W8DN

*****************

How do I identify my rotor. It is a bell type, 8 screw wiring block on
bottom. I believe it to be a ham-M type or so. Any Ideas?