Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Towertalk] Removing Superficial Rust from Rohn Tower Sections

from [Don Havlicek] [Permanent Link][Original]
To: <towertalk@contesting.com>
Subject: [Towertalk] Removing Superficial Rust from Rohn Tower Sections
From: n8de@thepoint.net (Don Havlicek)
Date: Sat, 19 Oct 2002 08:57:48 -0500 
Search the archive for this list .. there was some discussion about one
month ago .. and I believe, an address for a supplier.
Don


In a message dated 10/18/02 2:13:46 PM Eastern Daylight Time,
n8de@thepoint.net writes:


   And don't forget POR-15 .. though expensive, it seems to be the best
   solution..  

   POR = Paint Over Rust 

   Don 



Don - A couple of people have mentioned this product, but I'm not
familiar with it.  Do you know who
makes it and where it is available?
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Towertalk] 40m ant, Howard Miller
Next by Date:  [Towertalk] Soldering at the top of the tower, Barry
Previous by Thread:  [Towertalk] Removing Superficial Rust from Rohn Tower Sections, W3YY@aol.com
Next by Thread:  [Towertalk] Removing Superficial Rust from Rohn TowerSections, Pete Smith
Indexes:  [Date] [Thread] [Top] [All Lists]