Towertalk
[Top] [All Lists]

[Towertalk] LPDAs...

To: <towertalk@contesting.com>
Subject: [Towertalk] LPDAs...
From: Jim@ShawResources.com (Jim Shaw)
Date: Thu, 14 Nov 2002 08:51:38 -0800
QUESTION:  Instead of an LPDA, why not use a 3 element SteppIR antenna?
Don't they cover all frequencies continuously from 13.9 to 30 MHz?  Isn't
that similar to the design goal of an LPDA?  Seems like a SteppIR should
easily cover MARS frequencies in that range.  Just asking cause I have no
first hand experience with either and LPDA or a SteppIR.


73 de Jim WA6PX
JGShaw@Alumni.HAAS.org

-----Original Message-----
From: towertalk-admin@contesting.com
[mailto:towertalk-admin@contesting.com]On Behalf Of Jon Ogden
Sent: Thursday, November 14, 2002 6:41 AM
To: Dino Darling; towertalk@contesting.com
Subject: Re: [Towertalk] LPDAs...


on 11/14/02 12:17 AM, Dino Darling at k6rix@arrl.net wrote:

> I learned more about LPDA's from this article than anything I've read to
> date!  I will have to re-read the article myself, but I remember talk
about
> front-to-back figures that were BETTER than a small yagi.

I could believe they have better F/B than a small Yagi.  I also believe that
a good sized LPDA would outperform a small beam.  However, I am not
completely sold on the idea of absolutely better performance.

I'll have to look into it since I am currently perusing what sort of antenna
to get to replace my TA-33.

73,

Jon
NA9D

-------------------------------------
Jon Ogden
NA9D (ex: KE9NA)

Citizen of the People's Democratic Republik of Illinois

Life Member: ARRL, NRA
Member:  AMSAT, DXCC

http://www.qsl.net/na9d

"A life lived in fear is a life half lived."


_______________________________________________
AN Wireless Self Supporting Towers at discounted prices,
See http://www.mscomputer.com

Wireless Weather Stations now $349.95. Call Toll Free,
888-333-9041 for additional information.
_______________________________________________
Towertalk mailing list
Towertalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


<Prev in Thread] Current Thread [Next in Thread>